Drill rod

  • Hex 22 Shank 7 Degree taper/thread drill rod

    Hex 22 Shank 7 Degree taper/thread drill rod

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • Top Hammer Taper Drill Rod

    Top Hammer Taper Drill Rod

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • China drill rod taper manufacturer 11 degree rock drill rod

    China drill rod taper manufacturer 11 degree rock drill rod

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • H22 carbide tapered drill rod for rock drilling

    H22 carbide tapered drill rod for rock drilling

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • H22 carbide tapered drill rod for rock drilling

    H22 carbide tapered drill rod for rock drilling

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • Forging Hex. H19/H22/H25 Tapered Drill Rod for mining

    Forging Hex. H19/H22/H25 Tapered Drill Rod for mining

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • 50mm Triangular Drill Rod, Taper Screw Thread Pipe for Mining, Round Thread Drill Pipe for Water Well Drilling Rig

    50mm Triangular Drill Rod, Taper Screw Thread Pipe for Mining, Round Thread Drill Pipe for Water Well Drilling Rig

    Gimarpol’s Tapered Drill Rod with a hexagonal chuck section to provide leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and a tapered drill bit in the end. Tapered steel lengths are measured from the collar to the bit end.
  • GT60 Mining Rock Drill DTH Pipe Water Well MF Extension Speed Drifter Tungsten Carbide Drill Rod

    GT60 Mining Rock Drill DTH Pipe Water Well MF Extension Speed Drifter Tungsten Carbide Drill Rod

    R32, R38, T38, T45, T51, T60 Thread Extension Rod & MF rod :

    (1) Threaded Connection: R22, R25, R32, R38, T38, T45, T51, and so on.

    (2) Diameter: OD32, OD38, HEX32, HEX35, And so on.

    (3) Length: 600-6400mm.

    (4) Package: Wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.
  • Bench drilling T51 3660mm extension drill rods for mining

    Bench drilling T51 3660mm extension drill rods for mining

    R32, R38, T38, T45, T51, T60 Thread Extension Rod & MF rod :

    (1) Threaded Connection: R22, R25, R32, R38, T38, T45, T51, and so on.

    (2) Diameter: OD32, OD38, HEX32, HEX35, And so on.

    (3) Length: 600-6400mm.

    (4) Package: Wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.
  • R38 T38 T45 T51 Extension Rod Speed Rod MF drill rod

    R38 T38 T45 T51 Extension Rod Speed Rod MF drill rod

    R32, R38, T38, T45, T51, T60 Thread Extension Rod & MF rod :

    (1) Threaded Connection: R22, R25, R32, R38, T38, T45, T51, and so on.

    (2) Diameter: OD32, OD38, HEX32, HEX35, And so on.

    (3) Length: 600-6400mm.

    (4) Package: Wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.
  • R25 R32 R38 T38 T45 T51 Rock Drill Rod for Mining Machinery

    R25 R32 R38 T38 T45 T51 Rock Drill Rod for Mining Machinery

    R32, R38, T38, T45, T51, T60 Thread Extension Rod & MF rod :

    (1) Threaded Connection: R22, R25, R32, R38, T38, T45, T51, and so on.

    (2) Diameter: OD32, OD38, HEX32, HEX35, And so on.

    (3) Length: 600-6400mm.

    (4) Package: Wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.
  • T51 threaded extension drill rods for mine drilling rig

    T51 threaded extension drill rods for mine drilling rig

    R32, R38, T38, T45, T51, T60 Thread Extension Rod & MF rod :

    (1) Threaded Connection: R22, R25, R32, R38, T38, T45, T51, and so on.

    (2) Diameter: OD32, OD38, HEX32, HEX35, And so on.

    (3) Length: 600-6400mm.

    (4) Package: Wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.